Tell A Friend

  • Friend's email:
 

Future of movie theaters
Hello! This project was inspired by a book that I got from the library. Part of it talked about what movie theaters might be like in the future, and it mentioned simulator seats. So, I thought, "I wonder if you could make a NXT version of those..." and set out to make one. This project uses 2 NXT's, and 3 motors. For some reason, when i build a robot with my second NXT as a controller, get a working bluetooth connection and working programs, nothing happens. Please comment if you have a solution. Anyway, because of this, i used a motor pressing a touch sensor instead of bluetooth. Once again comment if you have a solution. I will,discuss the various parts in later steps

Posted by:

 4alex2behappy

Created:

 06 February 2013

Rate:

 

Tags:(?):

 cool, awesome, simulator, screen

The seat

This is the seat. The touch sensor is there to detect when the motor connected to the screen presses it. I had to make my own special pins that face different sides on the ends for the motor to connect to the seat. See picture 1 to see these pins.

The screen

This is screen. There really isn't much else to say about it.

Comments

6 comments

  • Karl4123

  • well, first, you have to connect the two nxts from the nxt that is sending the signals. also, you will have to include parts in program that receive/send the message. If you could post the program, i can tell you what's wrong

  • Posted 104 days and 15 hours ago


  • webmaster4o

  • Very cool, nice idea. 5 stars.

  • Posted 104 days and 9 hours ago


  • 4alex2behappy

  • Karl4123, Well, I don't know how to make a bluetooth program, ive been using programs off of NXTLOG and nxtprograms.com and it still dosen't work. :(

  • Posted 104 days and 8 hours ago


  • gusieburger

  • Cool. 5*s

  • Posted 104 days and 2 hours ago


  • norama

  • In my project Servo Control with Radio Remote, I have a Bluetooth Advice step that you should read. You may find the answer in the rules I have listed. But there may be other issues if you haven't set the connection up properly. Read the NXT guide book carefully. The Bluetooth connection in the programs in my project work very well and you may get some ideas from them.

  • Posted 103 days and 21 hours ago


  • NXTcraze1

  • Enter the future bot building challenge by adding the tag, 'futurebot'.

  • Posted 38 days and 8 hours ago


Add A Comment


Please log in or register to add a comment